Fusion 5 Fusion Welding System

Fusion 5 Fusion Welding Machine

Tube and pipe fusion welding equipment from SPS provides on-site "labtop" control for the sanitary process professional. The Fusion 5 creates crevice-free, sanitary small-diameter tubing systems for on-site fusion.

Fusion welding equipment creates cost-effective micro-tubing components in-field, on demand.

All components are available pre-fabricated. Use the Fusion 5 Fusion Welding System with the Bender and SPS Micro Tubing and Ferrules to produce elbows and sanitary adapters.

Combine the Fusion 5 Fusion Welding System with SPS rigid and flexible products for a virtually unlimited variety of system configurations.

Equipment Specifications
Fusion 5

For use with 1/8 to 3/4-in. (3- to 14.2-mm) tubing sizes

  • Height, in./mm: 6.5/165.1
  • Width, in./mm: 15/381.0 with handles
  • Depth, in./mm: 11/279.4
  • Weight, Ibs/Kg: 5.75/2.6
  • Head Specs: Magnaplate HCR
  • Heat: 480°F (249°C)
  • I.D. Sizes, in: 1/8, 1/4, 3/8, 1/2, 9/16
  • I.D. Sizes, mm: 3, 6, 10, 12, 14.2
Features
  • Removable Cover for Heater Head
  • Suction Cups on Base
  • Power: Available in 110 volt/60 cycles or 220 volt/50 cycles, 15 amps
  • On/Off Switch
  • Red Indicator Light

Fusion Welding Procedure with Fusion 5

Fusion 5 Step 1 - Prepare the tubing.
Prepare the tubing.

Fusion 5 Step 2 - Place the tubing end and the sanitary ferrule on the heater head.
Place the tubing and the sanitary ferrule on the heater head.

Fusion 5 Step 3 - Position the mandrel and apply pressure to create fusion.
Position the mandrel and apply pressure to create fusion.

Fusion 5 Step 4 - Remove the mandrel and clamp the component to the system.
Remove the mandrel and clamp the component to the system.